Specifications
The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.
It is only through the support of advocates such as yourself that true sound can be promoted...
- Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.
| Break in time: | 200 - 300 hours |
| Placement from rear wall: | 1' - 6' / 305 - 1 829 mm |
| Placement distance apart: | 4' - 10' / 1 219 - 3 048 mm |
| Frequency Response: | 29 Hz - 20 kHz ± 3 dB |
| Impedance: | 4 ohms mainly resistive |
| Sensitivity: | 85 dB/W/m. Maximum sound pressure 110 dB before dynamic compression |
| Recommended Power: | 40 - 200 W |
| Crossover frequency: | 4 kHz electrical and mechanical |
| Woofer: | 2 x 6.5" / 165 mm, 3" / 76 mm voice coil |
| Tweeter: | 1" / 25 mm aluminum dome, chambered |
| Dimensions (w x h x d): | 8.5 x 16.4 x 12" / 215 x 417 x 305 mm |
| Volume: | 15 l (internal) |
| Weight: | 10.5 kg / 23 lb |
| Recommended stand: | TOTEM T4L |