Specifications
The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.
It is only through the support of advocates such as yourself that true sound can be promoted...
- Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.
| Break in time: | 40 - 50 hours |
| Placement from rear wall: | 6"- 3' / 152 - 914 mm |
| Placement distance apart: | 2' - 8' / 610 - 2 438 mm |
| Frequency Response: | 57 Hz - 25 kHz ± 3 dB (in room) |
| Impedance: | 4 ohms |
| Sensitivity: | 87.5 dB/W/m. Maximum SPL 101 dB before dynamic compression |
| Recommended Power: | 20 - 80 W |
| Crossover frequency: | 2.5 kHz, 1st order compensated |
| Speaker Terminals: | 4-way bi-wireable |
| Woofer: | 4" / 102 mm; special long throw. Non resonant multi sandwich. Cone and dustcap. Large magnet system for greater dynamic linearity. |
| Tweeter: | 1" / 25 mm titanium dome. Additional flexible titanium linear suspension incorporated around center dome. Extreme high frequency ability and linearity. |
| Max Spl's: | In average room (12' x 20' / 4 m x 6 m) 110 dB peaks from 6 units |
| Dimensions (w x h x d): | 5.1 x h 11.3 x 7.1" / 130 x 287 x 180 mm |