Specifications
The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.
It is only through the support of advocates such as yourself that true sound can be promoted...
- Mass Loading: All Totem columns work very well without any type of mass loading. However if stability is an issue or if there is a particular over emphasis in the bass in the room they are used in, then mass loading can be experimented with. Variables such as electronics, wiring and room dynamics play a definite role and therefore the option is there for your experimentation. One may use: clean dry sand,silica sand, dry particulate matter or non-odor kitty litter.
- Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.
| Break in time: | 60 - 80 hours |
| Placement from rear wall: | 1' - 4' |
| Placement distance apart: | 4' - 10' |
| Mass Loading: | 5 - 10 lb in each cabinet |
| Frequency Response: | <39 Hz - 22 kHz ± 3 dB |
| Impedance: | 8 ohms |
| Sensitivity: | 88 dB |
| Recommended Power: | 20 - 100 W |
| Crossover frequency: | 2.5 kHz 2nd order |
| Woofer: | 5.5" long throw” |
| Tweeter: | 1" textile dome |
| Max SPL's: | In average size listening room 107 dB peak from pair at 2 m |
| Dimensions (w x h x d): | 6.3 x 33.5 x 9.5" / 160 x 850 x 242 mm |